Відео

what hardware used to fasten ?

Hello! LOVE your roof and am going to copy it for my 20-footer. Do you have the details written down anywhere? Stanley in Colorado.

Who the hell is going to run a high temperature heat gun directly on their wire? I get it's just a test but in real world this doesn't make a whole lot of sense. New concept is excellent stuff. As long as you don't run it 1 in away from a heat gun. A fuse is going to blow way sooner than that wire jacket is going to melt.

1/8" Steel probably would have been more than adequate. 1/4' seems overkill.

Heat cycle cause that yellowing

Thanks for the video. I know nothing about welding at the moment and was wondering what type of electrode you were using? I also was wondering if you have any problems with condensation and the wooden frame of the window getting/staying wet? Thank you!

I just got this - this thing doesn’t work in pipes under 1 foot deep. It’s ok for walls behind but not drain pipes or such. Big fail

Looks like your woofer is out of phase…left and right are not in sync with each other. I could me wrong, if I am, i apologize.✌🏼

Where did you buy it from?

I saw a thing where some of these use a bad glue on the PCB breaks down and becomes conductive and can short the main board. ua-cam.com/video/9gqBzLNMFe4/v-deo.htmlsi=VjLRJvKNghmdgGRt

Can you Tell Me Wood Thicknesse

I really want to try this out

TEMco is my go to welding/battery cable manufacturer. The ONLY competition that welding cable wounldnt win is possibly in the looks department, id rather have my current going to my amps than pretty jackets on my wire. For my money and piece of mind, its weld wire. Specifically TEMco brand. TEMco is the best price and flexible and it looks good imo. Im a welder and have been for 25 years. Ive seen what weld cable can stand up to, its insane. I like that the specs are listed right on the jacket of all certified weld cable. It has to be so you know what it can handle. With most all car audio brands of wire, its anyones guess, 😂. Most people i know also run weld cable after learning over time what the better choice is. Who would choose pretty looks over performance? Thats what it comes down to😊

Hope mine looks like the good one. I got mine into thermal overload one time but that's because I changed a setting on my head unit I didn't realize what it did but it made the amp go deep into the lows. Other then that I did go into protect and blew 2 sub's now. I have the T1500

Price

is there an identifying date on the container somewhere?

been using Temco for couple of years haven’t had problems yet, we using it on our frac equipment and having good luck with it

I run 2awg welding cable from the front to the back and i use 1awg CCA 3ft runs from the 2nd battery to the amp works just fine for running 3k. The reason for 2awg front run was 1awg was too big for my little chevy sonic.lol

FYI: Anybody experiencing a hum sound from the rear end of a third GEN explorer (especially under load) around 50-60mph should first check your tires for uneven wear. The auto all-wheel-drive components of these drivelines are very sensitive to this. There’s plenty of detailed info on this subject out there “Explorerforum”, and “SeriousExplorations” are great sources. Quite often that hum in the rear dif can be resolved with a new set of tires. About 5-6 years ago, mine went from a very loud hum to perfectly silent with a fresh set o’ rubber. However, there certainly are plenty of mechanical issues that can create the same hum - such as bearings, worn spider, pinion or ring gears, improper fluid levels, etc…. I’m rebuilding mine now from a broken spider, which still drove fine (other than one-legging) but also caused a hum under load. Just thought I’d mention this in case it helps save someone from rebuilding a perfectly good dif, then still needing a new set of tires on top of that to fix the issue.

Hola Soy de Perú Cómo se calibra, o repara mi láser de ese mismo modelo que muestras, refleja doble linea y habeces una linea más ancha de lo normal. Ya tengo 12 años con ese mismo láser y no lo quiero renovar por otro. Son muy buenos. Espero me puedas ayudar. Gracias.

I have 0/1 AWG welding wire front to back, 57' @ $5.50/ft

Just want to let you know that's wayyyyyy tooo much. You have to line it in the box not packed into the speaker

Number of strands means more than anything.

2hand set odisha corior available sir

Very good sound

What are the measures used bro.?

I saw a video you did years ago about the jbl bass pro 12 sub with an amp. Great video I have one but the amp doesn’t come on. Do you know how to fix that? I’ll check back on this video just Incase you leave a comment on what to do. If that makes sense. Thanks a ton

ua-cam.com/video/CstGD3wp6Y4/v-deo.htmlsi=jro4XtvOE20uu_m9

good work.

Makita ya es basura !!!

Is this still working for you?

I love how guys say somebody’s pretty poor at their job you could’ve got in and done it for him . I used to work at a place where guys used to back in B trains all the time and every time one of the guys trailers were a little crooked. One of the crane operators would whine and cry about it not being very straight but not once when I told them, the keys are in them to come down anytime you think you can do better. Did anybody ever take me up on the offer? NEVER

This is good. I am going to try it becaus its like $150 per hour in canada to cut it.

Well, I did not expect to see this on my timeline! Thanks for the shout out :)

hahaha

When you figure this out, can I buy one?

Can't hear anything over your background music.

How do we buy from you ?

Thank you. Another great video.

This is a really cool design. Hear me out now what if you were to adjust your speeds, feeds, and end mill and cut it out of aluminum for longevity. I can aluminum on my CNC router it just takes a bit more time.

How did this fix hold up?

not just a while since you were behind the camera it's a long time since you cleaned away dust 🤔🤔🤔🤔

Well done!

👍

Any surround issues at all?

If welding cable can survive in the brutal environment of a welding shop or out in the field for decades it will probably last in the protected environment of under the hood of a car or truck.

😩 P r o m o S M

So essentially I can use Channel 1 & 2 as a stereo channel by pressing down the stereo button and connecting a device with 2 outputs into them? Also is the reason your gain is down and the EQ is set to flat on 1 & 2 because whatever you have plugged into the mixer has its over preamp?

Is it a limited slip or open?